Performance Contracting Group Logo

Performance Contracting Group

Design Engineer

Posted 5 Days Ago
Be an Early Applicant
In-Office
Anaheim, CA, USA
89K-118K Annually
Senior level
In-Office
Anaheim, CA, USA
89K-118K Annually
Senior level
Coordinate BIM meetings, logistics, clash detection, conflict resolution, subcontractor communications, model sign-offs, and project closeout documentation. Create and maintain structural, interior, and exterior architectural models for project-specific requirements. Conduct site inspections, coordinate with BIM providers and clients, and support design and construction teams using Revit, Navisworks, and AutoCAD Architecture.
The summary above was generated by AI
Company Overview
Performance Contracting Group is a national employee-owned specialty contractor that offers quality services and products to the commercial, industrial, and non-residential construction markets. We are committed to recruiting, developing, and advancing employees from a diversity of backgrounds and experiences, as well as supporting a culture of safety and inclusiveness that allows you to contribute to your fullest potential. We place high value on training and professional development, encouraging you to broaden and strengthen your unique skill sets so you can fully realize your potential.
 

PCI is seeking an energetic, dependable and motivated Design Engineer for its Los Angeles Interior 557 operations based in Anaheim, CA. This individual will be responsible for the following duties:

 

  • Facilitate BIM Coordination meetings
  • Coordinate all BIM Logistics (Contracts, Emails, File sharing, etc.)
  • Review and document design document and coordination conflicts.
  • Run and analyze clash detection on federated model
  • Communicate conflicts in model; both real and potential
  • Prepare and distribute clash reports to facilitate the coordination process
  • Schedule and facilitate coordination meetings along with operations staff
  • Facilitate subcontractor communication in and out of meetings
  • Facilitate sign off and submittal of coordinated area
  • Site inspection and liaising with trade contractors
  • Meet with engineers, architects and/or clients as required to facilitate review of models as needed

 

CREATE & MAINTAIN MODELS FOR PROJECT SPECIFIC REQUIREMENTS:

  • Create models including structure, interior and exterior architectural elements.
  • Coordinate with BIM service providers and clients.
  • Compile contract BIM close out documentation.  

Salary Range: $89,000 - $118,400 annual salary plus non-guaranteed annualized bonus program

 

Requirements

  • Minimum 5 years of experience in computer assisted drafting and design
  • Proficiency in AutoCAD Architecture 2015, Revit and Navisworks
  • Bachelor’s degree in Construction Management, Construction Science, Architecture or Engineering fields
  • Ability to understand design and document coordination
  • Knowledge of construction industry, means and methods
  • Ability to take responsibility for the outcome and results of assigned projects
  • Proficient skills in Microsoft Excel & Microsoft Word
  • Proficient written and verbal communication skills
  • Motivated self-starter with strong work ethic and a willingness to take initiative
  • Positive attitude and ability to work in team environment
  • Work well under pressure and deadline
  • Ability to communicate the benefits of BIM, both for internal and external purposes
  • Passion about BIM and how it can be used to improve the productivity of those who work in design and construction.

Benefits

At Performance Contracting, our employees are our greatest asset. We put our people first and are proud to provide a comprehensive benefits package designed to meet the needs of our employees at every stage of life.  

In our commitment to fostering an environment where everyone can thrive personally and professionally, we offer: 

  • Competitive pay 
  • Incentive bonus plan 
  • Employee stock ownership plan (ESOP) 
  • 401(k) retirement savings plan with match 
  • Medical, prescription drug, dental, and vision insurance plans with flexible spending account option 
  • Life insurance, AD&D, and disability benefits 
  • Employee assistance program (EAP) 
  • Flexible paid time off policy and paid holidays 
PCG provides equal employment and affirmative action opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.  

PCG is a background screening, drug-free workplace. In accordance with the provisions of Tennessee Code Annotated (T.C.A.), Title 50, Chapter 9, PCG’s Drug-Free Workplace Program includes drug and alcohol testing as part of the hiring process and throughout employment, as applicable.

Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 

NOTICE TO STAFFING FIRMS, AGENCIES, AND EMPLOYMENT VENDORS:
Performance Contracting Group and its affiliates will not accept unsolicited resumes or claims on candidates from third-party employment vendors unless a signed Fee Agreement is in place AND a candidate has been submitted into our applicant tracking system (Dayforce). Vendor solicitation should be directed to the Corporate Recruitment Department directly; as such, firms that circumvent the required compliant process will be barred from submitting candidates. In the absence of a signed Fee Agreement and proper resume submission, PCG does not recognize any claim on a candidate by a third party and will consider unsolicited resumes the property of the company, reserving the right to engage and hire those candidates without any financial responsibility to the third-party vendor.

#PCI #LI-VQ1

Similar Jobs

Yesterday
In-Office
166K-249K Annually
Senior level
166K-249K Annually
Senior level
Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
Design and develop primary and secondary aircraft structural components from concept through production release. Perform CAD modeling, hand stress calculations, limited FEA, drawing release, and structural validation. Collaborate with aerodynamics, propulsion, avionics, payload, manufacturing, and flight-test teams to support integration, resolve build issues, and improve flight-critical designs. Document analyses and interfaces, participate in design reviews, and support testing and deployment of autonomous UAV platforms.
Top Skills: AbaqusAnsysAsme Y14.5Bonded JointsCadCatiaComposite StructuresDfmaFaa StandardsFastenersFinite Element Analysis (Fea)Gd&TMetallic StructuresMil-StdNastranNxSolidworksTolerance Stackups
Yesterday
In-Office
171K-257K Annually
Senior level
171K-257K Annually
Senior level
Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
Designs and develops structural components and assemblies for autonomous aircraft from concept through production release. Responsibilities include CAD modeling, structural calculations, limited FEA, drawings, design documentation, system integration, testing, manufacturing support, and design reviews. The role collaborates with aerodynamics, propulsion, avionics, payload, manufacturing, and flight-test teams while supporting flight-critical aerospace hardware through validation and deployment.
Top Skills: AbaqusAnsysAsme Y14.5CadCatiaComposite StructuresFaa StandardsFeaGd&TMetallic StructuresMil-StdNastranNxSolidworks
Yesterday
In-Office
108K-162K Annually
Junior
108K-162K Annually
Junior
Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
Design and release primary and secondary aircraft structural components from concept through production. Perform structural calculations and basic FEA, collaborate across engineering and manufacturing teams, support testing and flight-test resolution, and produce aerospace-compliant drawings, interface definitions, and analysis reports. The role focuses on composite and metallic structures, joints, fasteners, tolerancing, manufacturability, and increasing ownership of flight-critical UAV designs.
Top Skills: AbaqusAnsysAsme Y14.5CadCatiaDfmaFeaGd&TMil-StdNastranNxSolidworks

What you need to know about the Los Angeles Tech Scene

Los Angeles is a global leader in entertainment, so it’s no surprise that many of the biggest players in streaming, digital media and game development call the city home. But the city boasts plenty of non-entertainment innovation as well, with tech companies spanning verticals like AI, fintech, e-commerce and biotech. With major universities like Caltech, UCLA, USC and the nearby UC Irvine, the city has a steady supply of top-flight tech and engineering talent — not counting the graduates flocking to Los Angeles from across the world to enjoy its beaches, culture and year-round temperate climate.

Key Facts About Los Angeles Tech

  • Number of Tech Workers: 375,800; 5.5% of overall workforce (2024 CompTIA survey)
  • Major Tech Employers: Snap, Netflix, SpaceX, Disney, Google
  • Key Industries: Artificial intelligence, adtech, media, software, game development
  • Funding Landscape: $11.6 billion in venture capital funding in 2024 (Pitchbook)
  • Notable Investors: Strong Ventures, Fifth Wall, Upfront Ventures, Mucker Capital, Kittyhawk Ventures
  • Research Centers and Universities: California Institute of Technology, UCLA, University of Southern California, UC Irvine, Pepperdine, California Institute for Immunology and Immunotherapy, Center for Quantum Science and Engineering

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account